Need help?Do you have a question about the Kicker KMTC65 and is the answer not in the manual?
General| Speaker Type | Coaxial |
|---|---|
| Size | 6.5 inches |
| Power Handling (Peak) | 300 watts |
| Impedance | 4 ohms |
| Frequency Response | 35Hz - 21kHz |
| Sensitivity | 90 dB |
| Cutout Diameter | 5.75 inches |
| Tweeter Composition | Titanium |
| Woofer Composition | Polypropylene |
Select mounting points, considering obstacles and wire routing for optimal placement.
Route speaker and LED wires through the bottom of the lower mounting bracket.
Mount the swivel clamp using the bolt to allow for adjustable speaker positioning.
Tighten the swivel lever thumbscrew to lock the enclosure in its desired orientation.
Connect speaker and RGB LED wires to the source unit or amplifier.
Fasten the enclosure securely to the tube using mounting brackets and screws.
Instructions for returning defective merchandise to KICKER for warranty service.
Details the specific conditions and damages excluded from the KICKER warranty coverage.
Information on the expected service turnaround time for KICKER product warranty claims.
Warranty procedures and contact information for Spanish-speaking international customers.
Warranty procedures and contact information for German-speaking international customers.
Warranty procedures and contact information for French-speaking international customers.
To Next Page
