Kicker KMTC65 User Manual

{fKICKER.
MODEL:
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
KICKER LOADED MARINE CANS
Owner's Manual
KMTC65IKMTDC65IKMTC8
The KICKER KMTC Loaded Marine Cans are the perfect way to bring your music out into the marine or
power sports environment. The KMTC65 and KMTCB come loaded with the KICKER KM65 and KMB LED
speakers. The injection-molded ABS enclosures are
UV treated, splash resistant, and weather resilient.
Mount the KMTC Loaded Marine Cans 1n your boat or get creative with a pair of them in the gara@e, on
your 4x4 or Side-by-Side's roll bars, or in any other bar-mounted application.
Model: KMTC65 KMTDC65 KMTCB
Rated Impedance [OJ
4 4 4
Sensitivity [1W, 1m]
90 93 92
Peak Power Handling [Watts] 195 390 300
Continuous Power Handling [Watts RMS] 65
130 150
Enclosure Oiameter/VVidth [in, em] 7, 17.8
14-1/16,35.7
8-3/16, 20.8
Enclosure Depth [in, em] 9-11/16, 24.6 9-11/16, 24.6
11-5/16, 28.7
Enclosure Height (from bottom of roll bar) [in, em]
8-1/4, 21 8-1/4, 21 9-7/16, 24
Enclosure Height (bracket top to enclosure bottom) [in, em] 10·1/4, 26 101/4,26
11 1/2, 29.2
INSTALLATION
Step 1: Determine the location and placement of the KMTC cans onto the pipe or tube to which you are
mount1ng. Spreading the KMTC Loaded Marine Cans apart will provide better stereo performance, and is
usually preferable.
When determining the best locations for mounting, be careful to look for obstacles or
obstructions that could complicate mounting the KMTC. Please keep in mind the routing of your speaker
wires
as this can affect where you finally mount your cans. You will need to mark and drill a wire routing
hole
in the pipe 5/8" (16mm) in diameter. The placement of the hole must line up w1th the final position
of the lower mounting bracket
so that the wiring com1ng from the lower mounting bracket can be run
through; ie the hole should
be 90° from the direction the speakers will be aimed and in line with the w1ring
comng from the lower mount1ng bracket. If the speakers will be level with the horizon, you should drill a
hole directly in the bottom
of the tube.
/
2

Kicker KMTC65 Specifications

General

Brand	Kicker
Model	KMTC65
Category	Stereo System
Language	English