Kicker KMTC65 User Manual

Step
2:
Thread the speaker and LED wires through the bottom
of
the
lower
mounting bracket and out
of
the
plastic liner hole
1n
the center.
lower mounting bracket
t
IMPORTANT:
You
must apply a
thin
layer
of
the tncluded anti-seize compound to
ALL
threaded
fasteners
before
installation.
Step
3: The mounting hardware design provides
versatility
in
angular
posit1on1ng
to
direct the speaker's
output
to
the ideal
listen1ng
position using the quick adjust
swivel lever. With the
lower mounting bracket in
place, install the
swivel clamp
and tightly
secure it using the
included swivel bolt, making sure the
clamp
engages with the groove in the swivel
base.
lower mounting bracket
sw1vel
clamp
swivel bolt
3

Kicker KMTC65 Specifications

General

Brand	Kicker
Model	KMTC65
Category	Stereo System
Language	English