EasyManuals Logo

Kicker CompVR User Manual

Kicker CompVR
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Thank you for your support of KICKER products. Once you have had a chance to see and experience the capabili-
ties of the new KICKER CompVR subwoofers, we believe that you will be as excited as we are about these speakers!
The CompVRs truly set a new standard for bass performance.
This latest revision of our KICKER CompVR Subwoofers Recommended Applications/Enclosures Technical Update
brings together all of our Kicker CompVR woofers into one manual.
The enclosure recommendations in this paper supercede any other previously published recommendations.
Especially when used in sealed enclosures, the new KICKER CompVR will achieve maximum bass performance
after they have been broken in.
Approximately one to two weeks of daily playing will allow the suspension to soften, and reach its optimum equi-
librium. This time period may vary depending on the amount of play time, volume level, and type of music you lis-
ten to. More play time, with medium volume levels and more bass content, will break in the subwoofer most
quickly. The broken-in sub will exhibit stronger bass performance, smoother response, and greater low bass exten-
sion.
For those of you with more sophisticated audio equipment, the CompVR woofers can be broken-in on the test
bench overnight with the following procedure.
KICKER CompVR Freeair Break-in Procedure
1. Connect the speaker to a power amp of about fifty watts or more. The speaker should not be mounted in any
enclosure - just freeair.
Please make sure it will not walk off the bench while it is playing!
2. Connect an audio generator to the input of the power amp, and adjust the generator to approximately 39Hz for
the C8
VR, 31 Hz for the C10VR, 25 Hz for the C12
VR, 20 Hz for the C15VR
, and 17 Hz for the C18VR.
3. Now adjust the gain on the amplifier and generator so that the cone is moving to Xmax. This can be determined
visually by looking at the “blur depth” of the logo on the ISD. A close approximation will do. On the C8
VR this will be
about 3/4”, on the C10
VR about 7/8”, on the C12VR about 7/8”, on the C15VR about 1”, and on the C18VR
about 1”.
NOTE: Keep in mind that as the speaker is used under normal conditions the break-in will continue, so if you don’t
have time for the complete break-in period the speaker will still break-in itself under normal usage.
Kicker CompVR Subwoofers
Recommended Applications
Page 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kicker CompVR and is the answer not in the manual?

Kicker CompVR Specifications

General IconGeneral
Product typeSubwoofer driver
Subwoofer type-
Subwoofer peak power800 W
Subwoofer sensitivity86.9 dB
Subwoofer driver diameter30 mm
Subwoofer frequency range25 - 500 Hz
Subwoofer driver diameter (imperial)12 \
Product colorBlack
Voice coil typeDual
InterfaceTerminal
Weight and Dimensions IconWeight and Dimensions
Width- mm

Related product manuals