3
Solo-baric L5 Subwoofers
Features
Features
y SoloKön
™
is an ultra high performance composite, which
remains rigid, minimizes cone flex and lowers harmonic
distortion. The SoloKön™ consists of a unique one-piece,
aluminum vapor-deposit material that moves as a light
weight piston, exhibiting power and control.
y
Rear Cone Brace integrates into the SoloKön™ with a
continuous contact perimeter weld, which offers unmatched
strength and resistance to deformation under pressure.
y
Increased Santoprene
™
Surround Radius allows
extended cone excursion for additional bass output and higher
SPL. Santoprene™ is the next generation of surround material.
It offers unmatched UV protection and gives the SoloKön™
maximum EXmax™ (effective excursion) potential.
y
Stitched Surround adds a mechanical fastener to the
chemical adhesives. This duo prevents the cone and surround
from separating in the harshest conditions.
y
New Enhanced BAM (Basket and Motor) Assembly
utilizes a high strength steel basket, features a low-profile open
design, and provides a solid foundation for the precision-
aligned motor assembly.
y
Perimeter Venting in the BAM relieves pressure from
under the spider, supports a linear excursion, and helps
dissipate heat from the voice coil and motor structure.
y
Dual Ultra-Length Voice Coils sustain enormous cone
excursion and provide flexible impedance matching options.
y
High-Temp Polyimide Film Voice Coil Former
improves sonic and conductive properties, and prevents
thermal-electrical meltdown.
y
One-Piece Uniplate
™
with Vented Hyper-Extended
Pole Piece and Backplate
1. Optimizes heat transfer efficiency for cooler operation
and maximum power handling ability.
2. Eliminates erratic magnetic flux from the voice-coil gap.
3. Releases pressure under the suspension for uniform
cone movement and responsive low bass.
4. Prevents the voice-coil from bottoming out and
corresponding damage.
y
Sleeved High-Power Tinsel Lead Wires eliminate
broken leads and power loss, due to the common use of
“insufficient-gauge” lead wires. The lead wires are terminated
with multiple polymer-based strain-relieving mechanical
fasteners.
y
Spring-Loaded Nickel Plated Terminals flawlessly
connect medium to heavy gauge speaker wire to the sleeved
high-power tinsel lead wires.
2
Introduction
Solo-Baric L5
Subwoofer Owner’s
Manual
Models:
Attention:
Please record your purchase information in the area
below. We recommend attaching the original sales
receipt to this manual for future reference.
If you require service on this speaker during the
warranty period, you will need to provide this
information and a copy of the original sales receipt to
Kicker for validation of warranty repairs.
ALWAYS KEEP YOUR RECEIPT!
Authorized Kicker Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Congratulations!
You have purchased one of the most
technically advanced subwoofers in car
audio. The Solo-Baric L5 was designed
by the award-winning KICKER speaker
design team, tested in the judging lanes
of International Sound Competitions, and
proven on the Street to deliver the
ultimate in low bass output, durability
and outrageous SPL.
This is your “fuel for Livin’ Loud
™
”!
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
S15L5 / S12L5 / S10L5 / S8L5
Solo-baric L5 Subwoofers
To Next Page
Loading...
Need help?
General