Need help?Do you have a question about the Kicker Solo X S10X and is the answer not in the manual?
General| Size | 10 inches |
|---|---|
| Frequency Response | 20 - 100 Hz |
| Mounting Diameter | 9.25 inches |
| Enclosure Recommendation | Sealed or Vented |
| Type | Subwoofer |
| Impedance | 2 Ohms |
| Voice Coil Diameter | 3 inch |
| Minimum Vented Box Volume | 1.25 cubic feet |
| Maximum Vented Box Volume | 1.75 cu. ft. |
Diagram and explanation for connecting the woofer coils in parallel for specific impedance loads.
Diagram and explanation for connecting the woofer coils in series for specific impedance loads.
Diagram for connecting each voice coil to a separate amplifier channel for optimal performance.
Instructions for removing the woofer from packaging and separating the SPAIR from the BAM assembly.
Guidance on installing the Gap Cap and securing the BAM to the wood baffle assembly.
Instructions for cutting the woofer hole and drilling mounting holes using a jigsaw and drill bit.
Securing the SPLAT into the cutout and then installing and tightening the BAM to the baffle.
Inserting the SPAIR into the BAM, ensuring alignment, and securing it with acorn head bolts.
Details key parameters like SPL, displacement, mounting depth, and electrical characteristics.
Provides parameters such as Vas, Qms, Qes, Qts, and Fs crucial for enclosure design.
To Next Page
