Kidde 1276 User Manual

A.C. Wire-in Single and/or Multiple Station (24 Devices) Ionization Smoke
Alarm with 9 Volt Battery Back Up and “HUSH” Control to temporarily
silence nuisance alarms.
Thank you for purchasing this smoke alarm. It is an important part of
your family’s home safety plan. You can trust this product to provide
the highest quality safety protection. We know you expect nothing less
when the lives of your family are at stake.
This alarm is interconnect compatible with the following alarms and
accessories:
·Smoke alarms: 1235, 1275, 1276, 1285, PE120, PI2000, KN-COSM-IB
·Heat alarm: HD135F
·CO alarms: KN-COB-IC, KN-COP-IC
·Relay modules: 120X, SM120X, CO120X
·Strobe Light: SL177I
See User’s Guides for specific application information.
For your convenience, write down the following information.
If you call our Consumer Hotline, these are the first questions
you will be asked.
Smoke Alarm Model Number (located on back of alarm):
Date Code (located on back of alarm). The National Fire Protection
Association (NFPA) and the manufacturer recommend replacing this alarm
ten years from the date code:
Date of Purchase:
Where Purchased:
Smoke Alarm
User’s Guide
For models: 1276
Manual P/N 820-0394 Rev. A


LISTED
1276

Kidde 1276 Specifications

General

Brand	Kidde
Model	1276
Category	Smoke Alarm
Language	English

Summary

Smoke Alarm User's Guide Introduction

Compatible Alarms and Accessories

Lists interconnected devices for compatibility with the smoke alarm.

User Information Recording

Section for recording important details like model number, date code, and purchase information.

Recommended Smoke Alarm Locations

Mobile Home Installation Guidelines

Specific advice for installing smoke alarms in mobile homes, considering insulation and thermal barriers.

Installation Requirements and Instructions

Wiring Requirements and AC Harness

Details on electrical connections, power sources, and AC harness wiring.

Battery Installation and Mounting

Steps for inserting the battery and physically mounting the alarm unit.

Alarm Features and Operation

Tamper Resist Features

Security features designed to prevent unauthorized removal of the unit or battery.

Operation and Testing

Instructions on how to operate, test, and ensure the smoke alarm is functioning correctly.

HUSH Control and LED Indicators

Explanation of the HUSH button for silencing nuisance alarms and LED status lights.

Maintenance and Nuisance Alarms

Nuisance Alarm Causes and Handling

Information on common causes of nuisance alarms and how to handle them.

Maintenance: Battery, Cleaning, and Removal

Procedures for battery replacement, cleaning the alarm, and removing the unit.

Limitations, Safety, and Regulations

Smoke Alarm Limitations and Safety Habits

Discusses the inherent limitations of smoke alarms and essential fire safety habits.

Emergency Actions and Fire Safety Information

Guidance on what to do when the alarm sounds and resources for fire safety.

NRC and NFPA Regulations

Overview of relevant government (NRC) and industry (NFPA) standards and requirements.

Warranty and Service Information

California Fire Marshal Caution

Specific caution statement required by the California State Fire Marshal.

Service, Warranty, and Contact

Details on how to obtain service, warranty claims, and contact customer support.