9
5. Installaon Instrucons – Mounng
THIS ALARM MUST BE INSTALLED BY A COMPETENT PERSON AND IS TO BE INSTALLED AC-
CORDING TO THESE INSTRUCTIONS
Wall-mounng
1.
Drill two holes in a wall 7.8 cm apart (you may wish to use the back-plate for guidance)
2. Insert the two rawl-plugs, that are supplied, into the holes
3. Insert the two screws as supplied into the holes ensuring enough of the screw scks
out of the wall (approx. 3mm)
4. Hook the alarm over the screws
Free-standing
1. No more than 1 metre from the floor (to minimise this risk of the alarm being
permanently damaged should it be knocked to the floor from a greater height)
2. Make sure the alarm is in the upright posion and not lying flat on the surface
To Next Page
Loading...
Need help?
General
