Kidde 7DCO User Manual

14
6. Using Your Alarm (for Digital unit only) – Cont’d
Peak Level Display
Press peak level buon to display the most recent CO reading between 11 – 999ppm.
This feature is useful to help you to know what levels of CO may have been detected in your
absence so correcve acon can be taken (such as servicing your boiler).
NOTE: The peak level memory is cleared to zero if whilst holding the peak level buon the test
reset buon is pressed and released before releasing the peak level buon.
CO levels up to 30ppm can occur under normal non-dangerous condions. Such condions
could include nearby heavy traffic, starng a vehicle in an aached garage, starng a fire or a
nearby charcoal barbecue.
2530-7202-06_7CO(Caravans):_ 2015.2.9 10:18 AM Page 14

Kidde 7DCO Specifications

General

Type	Carbon Monoxide Alarm
Power Source	Battery
Battery Type	2 AA batteries
Display	Digital Display
Alarm	85 dB at 10 feet
Test/Reset Button	Yes
Sensor Type	Electrochemical
Operating Temperature	40°F to 100°F (4.4°C to 37.8°C)
Features	peak level memory
Operating Humidity	10% to 95% relative humidity (non-condensing)
Certifications	UL 2034