EasyManuals Logo

Kidde KN-SMFM-i Specifications

Kidde KN-SMFM-i
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Silhouette120V AC/DC Wire-in
Low Profile Smoke Alarm
Part Number 21007288 Model KN-SMFM-i
Description
The Kidde Silhouette is a low profile AC/DC powered,
ionization smoke alarm that operates on a 120V power
source with a sealed rechargeable battery backup.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to
help insure maximum detection of the various types
of fire that can occur within the home.
This smoke alarm is available in a 4-piece cut case with
tray for easy display. This unit is a UL Listed product with
a 10-year limited warranty.
Install Confidence
Easy Installation
•Innovativelowprofilealarmfitsinmostcommon
electrical 2-gang and plastic, round boxes with
3 1/2” hole spacing.
•Pre-strippedwiringharnesswitheasyoffcapdoes
not require stripper tool. Tinned strands increase
conductivity and wire nut grip.
Fewer Callbacks
•Onebuttondesignforeasyoperationandless
confusion.OperatesSmartHush™andalarmtest.
•Sealedrechargeablebatterydoesnotneedtobe
replaced for the life of the alarm.
User-Friendly Features
•Batterybackupprovidesprotectionincaseof
power failure.
•Unitcanbeinterconnectedwithupto24total
devices (12 smoke alarms and 6 heat alarms,
COalarmsorsimilardevices).Seeuser’sguide
for complete instructions.
Innovative low profile alarm design
Ionization Sensing Technology
One button design (operates Smart Hush™ and test)
Test verifies alarm operation
Hush silences nuisance alarms
Sealed rechargeable battery backup (included)
will last the life of the alarm
LED indicates alarm condition
Alarm memory
Pre-stripped wiring harness with tinned strands
U
L
SIGNALING
LISTED

Other manuals for Kidde KN-SMFM-i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kidde KN-SMFM-i and is the answer not in the manual?

Kidde KN-SMFM-i Specifications

Power IconPower
power source120VAC (80mA) with Rechargeable Battery Back Up
audio alarm85dB at 10ft
interconnectsUp to 24 Kidde devices/18 initiating
Operating Environment IconOperating Environment
temperature range40˚F (4.4˚C) to 100˚F (37.8˚C)
humidity rangeup to 85% relative humidity (RH)
resistance of interconnect wiringmaximum of 10 ohms
Weight and Dimensions IconWeight and Dimensions
size5.25” width x 1.5” depth
weight.5lb
depth of box for installationmust exceed 2 1/8”

Related product manuals