KIDDY Evostar 1 - 3 Chassis; Fitting and Removing the Front Wheels; Fitting and Removing the Rear Wheels

EN
8
WARNING
Only use the Evostar 1 tandem in the congurations
as described in 7.11 and illustrated on g. 46–52.
WARNING
e maximum weight for the shopping basket is 2 kg.
WARNING
Only use the Evostar 1 seat units, carrycots, acces-
sories and car seats recommended by Kiddy.
3. Chassis
3.1 Fitting and removing the front wheels
Press the quick release button on the back of the wheel housing on
the chassis and push the front wheel onto axle (g. 1).
e wheels are marked L for left and R for right from the perspective
of standing in front of the chassis.
Important: Check the wheels are secure by pulling downwards.
To remove, press the quick release button on the back of the wheel
housing on the chassis and pull the wheel away from the axle.
3.2 Fitting and removing the rear wheels
Press the button in the centre of the rear wheel and push onto the rear
wheel housing (g. 2, no 1). Important: Check the wheels are secure by
pulling outwards.
To remove, press the button in the centre of the rear wheel and pull
the wheel away from the wheel housing (g. 2, no. 2).