KIDDY Evostar 1 - Fitting the Tandem Car Seat Adapters; Removing the Tandem Car Seat Adapters; Fitting the Tandem Car Seats; Removing the Tandem Car Seats

EN
18
7.7 Fitting the tandem car seat adapters
Fit the tandem adapters (g. 41) as described in point 7.1. Fit the lower
car seat adapters (curved) to the lower position until they click into
place.
Fit the upper car seat adapters (straight) to the upper position until
they click into place (g. 42).
e adapters are marked L for left and R for right from the perspective
of standing behind the handle of the chassis.
WARNING
Ensure the adapters are engaged before use by
pulling them upwards.
7.8 Removing the tandem car seat adapters
Depress the grey buttons on the car seat adapters (g. 43, no. 1) and
lift o the chassis (g. 43, no. 2).
7.9 Fitting the tandem car seats
Lower the car seats onto the adapters and press down rmly until the
car seats clicks into place (g. 44).
WARNING
Ensure the car seat is locked into place by gently
pulling the car seat upwards.
Note: Always t the lower car seat rst parent facing. Always t the
upper car seat parent facing.
7.10 Removing the tandem car seats
Depress the buttons on either side of the car seat (g. 45, no. 1 + 2)
and lift o the adapters (g. 45, no. 3).