HOW TO OPERATE
MATERIAL COMPOSITION OF THE KIDDYGUARD AVANT
8
The plastic parts are made of polyamide (PA6), Polyoxymethylene (POM), Polypropylene (PP) and Polyester (PE).
The body of the KiddyGuard Avant is made of aluminium. The materials are chosen for their
strength and resistance. All parts are non-toxic and can be recycled. The mesh of the kiddyguard is flameproof.
All parts of the KiddyGuard Avant can be cleaned with a mild, liquid household detergent on a damp cloth.
Do no use chlorine or abrasive powder OR liquid detergents.
- 14 -
English
The KiddyGuard Avant is easy to operate single-handed.
To close the KiddyGuard Avant
a) Push down the button on the top of the gate.
b) Turn the button clockwise.
c) Use the handle to pull the gate across, and hook it
onto the locking strip.
IMPORTANT!
AFTER CLOSING KIDDYGUARD AVANT, ALWAYS
CHECK THAT THE GATE IS LOCKED, BY PUSHING
GENTLY AGAINST THE MESH.
To open the KiddyGuard Avant
Release the gate by repeating the operations
in 8a and 8b.
Unhook the gate and let it roll up.
a
b
CLEANING INSTRUCTIONS
page 8:16
TIP: the more you turn the button the more time you
will have to open or close the gate.
To Next Page
Loading...