KidKraft Avalon - User Manual

Need help?

Do you have a question about the KidKraft Avalon and is the answer not in the manual?

Summary

Product Components and Assembly Steps

Hardware and Parts List

Lists all required hardware components and table parts for assembly.

Assembly Step 1

Instruction for the first step of assembling the table.

Assembly Step 2

Instruction for the second step of assembling the table.

Important Safety and Maintenance Information

Assembly Caution

Advisory regarding adult assembly and keeping small parts away from children.

Use and Maintenance Guidelines

Recommendations for product use on level surfaces and regular hardware checks.

Assembly Warning

Warning about small parts and sharp points, not suitable for children under 3 years.

General Warnings and Important Information

Details on product safety, supervision, and inherent imperfections in handcrafted items.

Cleaning Instructions

Guidance on cleaning the product surface using mild soap and a damp cloth.

Sole and Limited Warranty

Information on the 90-day warranty against manufacturing defects.

Customer Service and Contact

Customer Service Contact

Provides customer service phone number and website for assistance and part orders.

This document provides assembly instructions and important information for the Avalon / Brighton Table, manufactured by KidKraft. The table is identified by item numbers #26612C, 26650B, 26701D, and 26634C.

Function Description

The Avalon / Brighton Table is a piece of furniture designed for assembly by an adult. It appears to be a small, rectangular table, likely intended for children's use given the manufacturer's typical product range and the warnings about small parts. The assembly process involves attaching four legs to a tabletop using specific hardware.

Important Technical Specifications

The table assembly requires the following hardware components:

A. Washer: 8 pieces
B. Lock Washer: 8 pieces
C. Threaded Rod: 8 pieces, Ø6mm, 3 inches (75 mm) long
D. Large Bolt Anchor: 4 pieces
E. Large Nut: 8 pieces
Wrench: 1 piece (included for assembly)

The assembly diagram shows a tabletop (labeled '1') with pre-drilled holes for attaching the legs. Each leg (labeled '3') has a threaded rod (C) inserted into it, which then connects to the tabletop. The large bolt anchors (D) are inserted into the tabletop, and the threaded rods (C) from the legs are secured to these anchors using washers (A), lock washers (B), and large nuts (E). The assembly process is broken down into two main steps, with Step 1 focusing on preparing the legs and Step 2 on attaching them to the tabletop.

Usage Features

The table is designed for use on level surfaces. It is explicitly stated that adult assembly is required due to hardware containing small screws and sharp points, which should be kept out of reach of small children. The product is intended for children of a specific age or above, and children younger than the specified age should not use it. Climbing on or around the item is discouraged, and adult supervision is always recommended.

Maintenance Features

Cleaning Instructions:

The surface should be cleaned using a slightly damp cloth and mild dishwashing liquid if necessary.
Avoid using cleaning products containing alcohol or ammonia, as these can dull the shiny surface of the product.
Furniture polish can also be used for cleaning and dusting.
It is recommended to test all cleaning materials on an unseen underside surface of the product before widespread application.

General Maintenance:

Users should check the assembly at regular intervals.
Hardware should be tightened frequently if necessary.
Failure to perform maintenance could lead to the product ceasing to function properly.

Warranty Information:

The product comes with a sole and limited warranty against manufacturing defects for a period of 90 days from the date of purchase, applicable only to the original user.
In case of a manufacturing defect, parts will be replaced, the entire product will be replaced, or the purchase price will be refunded, at the manufacturer's discretion.
To activate and protect the warranty, users must preserve proof of original purchase and carefully inspect the product before and after assembly for any missing, degraded, broken, improperly sized, or hazardous parts (e.g., loose screws, exposed nails, sharp edges).
If any defects are observed, the product should not be used, and the manufacturer must be notified immediately.
Misuse, improper assembly, failure to honor warnings, failure to supervise, inspect, or maintain the product, or damage (intentional or inadvertent) will invalidate the warranty.
To submit a warranty claim, customers should contact KidKraft Customer Service at 1-800-933-0771 for instructions on providing proof of purchase and returning the item freight pre-paid.

Warnings:

CAUTION: Adult assembly required. Hardware contains small screws with sharp points. Keep unassembled parts out of the reach of small children.
WARNING: CHOKING HAZARD. Small parts and sharp points, not suitable for children under 3 years.
Important Information: All wooden items are handcrafted, hand-assembled, and hand-painted, making each one unique. Slight imperfections may occur and are not considered manufacturing defects. The warranty does not cover damage from permanent markers, non-water-based paints, crayons, or washable markers, as some of these contain permanent color dyes that can damage the surface.
Before contacting customer service, users should locate the batch code number (e.g., 2693/65006/04) found on the bottom or back of the product.