KidTrax KT1006 - Installing Windshield;Mirror Hardware

Assemble the Corvette
10. Windshield: Locate hardware bag labeled “B”. Locate the six holes to secure
the windshield. Use six self-tapping screws to secure the windshield (Figure 10).
DO NOT USE POWER DRILL. Do not overtighten hardware.
Problem: my
photo is at an
angle and
doesn’t show
both sides.
10
Windshield (6)
Install Hardware (continued)
B
Problem: my
photo is at an
angle and
doesn’t show
both sides.
11
Mirrors (2)
D
11. Mirrors: Locate hardware bag labeled “D”. Locate the two holes to secure the
mirrors. Use one self-tapping screw to secure each mirror (Figure 11).
DO NOT USE POWER DRILL. Do not overtighten hardware.
１１