EasyManua.ls Logo

KidTrax KT1006 - Initial Charging Procedure; Disconnecting the Charger

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY.
See page 19 for battery maintenance and page 21 for recycling information.
NOTE: It is not necessary to remove the battery from the vehicle for charging.
However, if the adapter cord will not safely reach a 120-volt wall outlet, the battery
can be removed for charging (see page 20).
4
4.
Plug the charger into a standard 120-volt wall
outlet. Light on charger will glow RED.
The charger may feel warm during charging.
This is normal and not a cause for concern.
3. P
lug the charger connector into
the battery.
Use ONLY the Kid Trax 12-volt
charger included with the Corvette
(Input: AC120V–, 0.5A, 60Hz
Output: +15VDC, 1.5A).
NOTE:
No metal contact
intended to be in this area.
Cor
rect as shown.
Disconnect Charger from 12-Volt Battery
Unplug the charger from the wall outlet.
Unplug the charger from the 12-volt battery.
Plug the battery connector into the battery.
Lower the hood completely.
Connect Charger to 12-Volt Battery
1. Open the hood.
2. Locate 12-volt battery.
Unplug the
battery connector from the
battery.
Charge 12-Volt Battery Prior To First Use
3
2
- +
1

Related product manuals