EasyManua.ls Logo

KIDWELL VENTO - Product Characteristics

KIDWELL VENTO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
11
PRODUCT CHARACTERISTICS
Age Range: 3+ years old
Suitable for children of height 95-130 cm
Child Weight: max. 50 kg
Quick folding system
3-position steering column height adjustment
Integrated rear brake
Steering through balancing the body
Front torsional wheels and rear with LED lights
Kick Scooter Weight: 2,7 kg
PRODUCT COMPONENTS (check page. 3)
1. Handlebar
2. Twist clamp
3. Handlebar shaft
4. Handlebar sleeve
5. Front wheels
6. Brake
7. Rear-wheel
ASSEMBLY AND FOLDING DOWN
1. One of the sides of the steering column is flat, preventing the steering column from
rotating after attaching it to the deck. The flat side of the steering column should face the
same direction as the flat part of the attachment opening in the deck.
When connecting the steering column to the deck, the lock must be pressed in a way
that it does not stick out of the steering opening, next push the steering column down
until you hear the lock make a “click” sound
WARNING: make sure that the lock is activated, and the steering column firmly fixed
in the steering opening
2. In order to fold the kick scooter, you must pull the collar located at the bottom of the
steering column and hold it extended. While holding the collar extended, start folding the
steering column. Let go off the collar once the steering column is in a horizontal position.
DISASSEMBLE
When the steering column is properly attached to the deck, the lock should be located
at the level of the front wheel, right below the deck.
In order to take out the steering column, the lock should be pressed making it disappear
in the steering opening, next the steering column can be taken out.