A
Page 9 / 12
Datasheet 1.10-60.010-01-EN
RBW301-C, RBW302-C, RBW304-C, RBW305-CProduct Description
Issue 2017-07-20
Setting the room temperature
Requirements: Indicator on the display:
► Rotate or press the knob.
The temperature value is displayed and flashes.
► Rotate right: Increase the temperature. Rotate left: Reduce the temperature.
The temperature can be set over a range of up to +/-9.9 degrees.
► Press the knob: The preset temperature is saved and displayed.
The temperature is regulated accordingly.
Energy saving function (RBW304-x, RBW305-x)
► Switch the presence button to “Absent” when you leave the room for a longer period of time.
Indicator on the display:
The energy saving function is activated and the temperature is set to a preconfigured value
(can be displayed, but not adjusted).
► Switch the presence button to “Present” when you return to the room.
Indicator on the display:
The energy saving function is switched off. The temperature is regulated accordingly.
Schedule
(Supported by RCC200-L, RCN200-L and DDC420)
Setting the timer
The following schedules (two timers in each case) are available: MO FR (working days), SA SU
(weekend), MO SU (week) as well as MO TU WE TH FR SA SU for the individual days.
► Press and hold the knob for three seconds.
The schedules are displayed.
► Rotate the knob: Select the schedule. Press the knob: Confirm selection.
First timer: The start time is displayed and flashes. Indicator on the display: , time, .
► Rotate the knob: Set the start time. Press the knob: Confirm the setting.
First timer: The end time is displayed and flashes. Indicator on the display: , time, .
► Rotate the knob: Set the end time. Press the knob: Confirm the setting.
The display switches to the start time of the second timer.
Second timer: If required, set in the same way as for the first timer and confirm. Indicator on
the display: , time,
The timer settings are shown on the display on the corresponding day of the week.
Deleting the second timer
► Select the timer end time as described above. Indicator on the display: , time,
► Rotate the knob to the left (end time = start time). Press the knob: Confirm the setting.
Timer is deleted and is no longer displayed.
Deleting the first and second timers
► Select the end time of the first timer as described above. Indicator on the display: , time,
► Rotate the knob to the left (end time = start time). Press the knob: Confirm the setting.
The first and second timer have been deleted and are no longer displayed.
To Next Page
Loading...
Need help?
General
