Contour Switch explained
The Contour switch provides an easy method to slightly tailor the speaker´s linear frequency response
to your personal taste.
The default setting of the Contour switch upon delivery is linear (9 o´clock position, Ff).
For the Kii Three we use a single 16 position rotary dial that provides 14 dierent presets.
Whenever the slot of the Contour switch is in a horizontal position (no matter if pointing to the left or right),
the frequency response is set to at (marked Ff).
Always start listening in the at position and try out dierent settings in comparison.
Three dierent lters are implemented.
1 | A low-shelf at 300Hz
2 | A high-shelf at 3kHz
3 | A high-shelf at 10kHz
You can either use a single one,
or a combination of low and high shelf.
14
To Next Page
Loading...