Kikkoman Biochemifa Smart - Overview

9
3. Overview
The check of Lumitester Smart/PD-30/PD-20 operation and the check of sensitivity
can be performed by using this kit.
This kit can generate a stable light by adopting automatic light control using LED.
4. Features
• Electric method using LED
• The fluorescence by a radioactive material is not used
• Stable light is generated by automatic light control
• Battery exchanging is unnecessary with rechargeable
• Charge time is about 30 seconds
• Luminescence duration: About 15 minutes
5. List of components
Name
Specification and characteristic
Quantity
Light source (positive rod)
1
Blank tube (negative rod)
Typical 0 RLU
1
AC/DC adaptor for charge
Output DC 5V 3A
1
Power cable for Japan A type 1
Power cable for Europe
C type
1
Operation manual
Ver.1.1
1
Case for
transportation and
storage.
1
6. Dimension and part names
Jack for
charge
The body of a light source
Luminescence part
Labels (RLU and term-of-validity display, etc.)
Hole for degassing