9. Maintenance
9.1 Maintenance of a light source
The surface of the luminescence part is glass.
If this part is dirty, light volume will decrease.
In such a case, wipe with a dry cloth or paper such as tissue paper.
If this part is heavily dirty, wipe with a soft cloth damped with diluted mild detergent
solution.
<Cautions>
Do not spill liquids, reagents nor organic solvents, etc. over the instrument.
If any liquid should be spilt on the instrument, wipe the liquid off immediately, dry the
instrument.
When dirt remains: Take the same treatment as the above-mentioned maintenance.
10. Troubleshooting
When abnormality is observed, remove AC power cord from outlet
immediately
When abnormalit
y is observed such as malfunction, burning smell,
fuming etc., there is a danger of fire and burst. Make sure that fumes
are extinguished, and contact the dealer or us. Never repair the
instrument by yourself, as this is very dangerous.
To Next Page
Loading...