Kikusui PLZ164WL User Manual

46 PLZ-4WL
ABC Preset Memory
Recalling ABC preset memory entries
There are two methods of recalling the preset memory, “SAFETY” and “DIRECT.”
SAFETY
You can recall a memory entry after first checking its contents on the display.
DIRECT
The settings of the setup memory entry are applied immediately.
The factory default setting is “SAFETY.”
p. 54
You can set the preset memory recall method (“SAFETY” or “DIRECT”) from the menu by
selecting “1. Setup” > “3. Memory.”
■ Memory recall method (SAFETY)
1
Configure the proper operation mode and range settings for the preset
memory entry that you want to recall.
2
Press the key that corresponds to the preset memory entry (A, B, or C)
that you want to recall.
The selected key lights.
The settings stored in the specified preset memory are displayed. You can recall a
different preset memory entry by pressing another preset memory key (A, B, or C).
3
Check the contents of the preset memory entry, and press ENTER.
The selected key lights. The settings that correspond to the selected memory entry
are recalled and applied. If you change the settings, the key light turns off.
■ Memory recall method (DIRECT)
1
Configure the proper operation mode and range settings for the preset
memory entry that you want to recall.
2
Press the key that corresponds to the preset memory entry (A, B, or C)
that you want to recall.
The selected key lights. The settings that correspond to the selected memory entry
are recalled and applied. If you change the settings, the key light turns off.
See
Memo
You can cancel by
pressing PREV
(SHIFT+ ).
0.00mA 0.000V
0.000W
CC
8.000 A
2.000 A
SET
RECALL
H 50A 30V
Setting saved to the
preset memory.

Kikusui PLZ164WL Specifications

General

Brand	Kikusui
Model	PLZ164WL
Category	Measuring Instruments
Language	English