To Next PageTo Next Page
Need help?Do you have a question about the Kikusui TOS9301 and is the answer not in the manual?
General| Model | TOS9301 |
|---|---|
| Category | Measuring Instruments |
| Withstanding Voltage Test | Yes |
| Insulation Resistance Test | Yes |
| Leakage Current Test | Yes |
| Display | LCD |
| Type | Insulation Resistance Tester |
| Output Voltage Range | AC: 0.05 kV to 5.00 kV, DC: 0.05 kV to 6.00 kV |
| Interface | RS-232C, USB |
| Power Supply | AC 100 V to 240 V, 50/60 Hz |
Covers pre-test, testing, post-test safety measures, remote control, malfunctions, and protection functions.
Details how to configure parameters for Partial Discharge (PD) tests, including voltage, charge, and filters.
Details how to configure parameters for Patient Leakage Current (Patient) tests, including network, polarity, and limits.
Explains how to stop Patient Leakage Current tests and interpret judgment results.
Details how to configure parameters for Meter Mode, including network, range, and measurement mode.
Guides on creating programs, setting steps, executing tests, and managing operations.
Covers connector details, pin arrangements, signal circuits, and usage examples.
Explains activating/releasing interlocks and starting/stopping tests using external signals.
Explains how to save and recall test conditions to/from internal and USB memory.
Details specifications for output functions, measurement, and judgment criteria for ACW/DCW tests.
Lists specifications for output functions, measurement, and judgment criteria for IR tests.
Details specifications for output, measurement, judgment, and timer functions for EC tests.
Lists specifications for output functions, measurement, judgment, timer functions, and other parameters for PD tests.
Covers specifications for TC, PCC, Patient, and Meter modes, including measurement circuits and ranges.
