To Next PageTo Next Page
Need help?Do you have a question about the Kikusui TOS9300 and is the answer not in the manual?
General| Type | Withstanding Voltage Tester |
|---|---|
| Ramp Time | 0.1 to 999.9 s |
| Interface | RS232C, USB |
| Power Supply | 100 to 240 V AC, 50/60 Hz |
| Insulation Resistance Test | Optional |
| Ground Bond Test | Optional |
| Earth Leakage Current Test (Touch Current Test) | Optional |
| Output Voltage Range | AC: 0.05 kV to 5.00 kV, DC: 0.05 kV to 6.00 kV |
Outlines essential checks and safety measures to be taken before and during testing operations.
Details safety measures to follow after the output voltage has been turned off, including discharge times.
Discusses potential malfunctions and emergency measures to take in case of failure.
Describes various protection mechanisms, their activation conditions, and remedies to ensure safe operation.
Explains how to connect test leads for high-voltage and insulation resistance testing procedures.
Describes the procedures for connecting test leads for earth continuity testing using different wiring methods.
Details the setup for leakage current tests, including insulation transformers and EUT power connection.
Details how to create, rename, and delete test programs for automated testing sequences.
Guides on how to edit, add, delete, and save individual steps within an auto test program.
Explains how to execute an auto test program and monitor its behavior during operation.
Details the specifications and pin arrangement of the SIGNAL I/O connector for external control.
Explains how to use the interlock function for safety, including activation and release conditions.
Explains procedures for restoring factory default and reset settings, including interface settings.
Details inspection procedures for withstanding voltage, insulation resistance, and earth continuity tests.
Guides on performing pre-tests for leakage current measurements, including measurement checks.
Provides instructions for replacing the backup battery and fuses, including safety precautions.
Recommends periodic calibration and explains how to perform it or arrange for service.
Lists common symptoms, possible causes, and remedies for issues encountered during operation.
