TOS93 Series User’s Manual 53
Withstanding Voltage and Insulation Resistance Tests | Setting Test Conditions
Start voltage
Set the voltage 0.1 seconds after the START switch is pressed as a percentage of the test voltage. If you
do not want to set the start voltage, set Start Voltage to off.
1
On the Home menu screen, press Voltage > Start Voltage.
2
Press Start Voltage to switch between on and off.
The start voltage switches between on and off each time you press the key.
3
If you select on, use the numeric keypad or the rotary knob to enter the percentage.
This completes the setting.
Test Voltage
Start Voltage
0.1 s Rise Time
Ŷ:KHQWKHVWDUWYROWDJHLV
TESTRISE
READY
Test status
Output off
Example: Home menu screen of ACW
To Next Page
Loading...
