Kikusui TOS9301 - Earth Continuity Test

90 User’s Manual TOS93 Series
Earth Continuity Test
Applicable models: , ,
This chapter describes how to set test conditions, start tests, and view the results for earth continuity (EC)
t
ests.
The following flowchart shows the configuration and test steps.
Setting Test Conditions
This section describes the test conditions of earth continuity (EC) tests and how to set the conditions.
Displaying the setup screen (Home menu)
1
On the Function menu screen (p.46), press EC.
2
Use the sub-function keys to select AC or DC.
The setup screen (Home menu) for the EC test conditions appears.
Set the required conditions by referring to the description of test conditions
(p.91).
9302
9303
9303LC
Start a test.
Set test conditions.
Finish the test and judge.
(p.90)
(p.101)
(p.106)