7
SAFETY
AVOID POSSIBLE INJURY
Always use safety precautions. Most accidents are a result of failure to practice safety. Accidents cause lost time and suffering.
Do not operate AUGER without reading this manual thoroughly.
Follow all safety precautions as outlined in this manual and in gravity box operator’s manual.
All machinery should be operated only by those who are experienced and responsible and have been delegated to do so.
BEFORE OPERATING
Lock brakes on truck or tractor to prevent movement of your gravity box during operation.
Be sure that the auger is secured properly to the side of the gravity box, and be sure that all hardware is in place and properly secured.
Check the winch and safety cables for wear and abrasions. If cables are worn or damaged, replace before using auger.
Keep children and all unauthorized personnel clear of work area. Before starting hydraulic supply, be sure that all power (electrical
and hydraulic) to the box auger is in the off position.
Do not allow anyone to ride on the equipment. Make sure everyone is clear before operating the machine or tractor.
Always shut tractor engine off when working on the unit.
The box auger is not insulated. Keep away from all electric lines and devices. Electrocution can occur without direct contact.
Be sure that all safety shields are in place, and the clean-out door is closed and securely latched.
Keep body, hair, and clothing away from moving parts.
IF INJURED BY ESCAPING HYDRAULIC OIL, SEE A DOCTOR AT ONCE. SERIOUS INFECTION OR REACTION CAN DEVELOP
IF PROPER TREATMENT IS NOT ADMINISTERED IMMEDIATELY.
Use a piece of cardboard or wood to detect leaks of hydraulic oil under pressure.
DURING OPERATION
Keep children and all unauthorized personnel clear of work area.
Do not operate with safety shields removed, or clean-out door open.
Lower HYDRAULIC AUGER to transport position at completion of operation, or when not in use. Do not transport with the auger in
raised position.
Be sure that the auger tube is empty before placing in transport position.
When placing the auger into transport position, ensure that all personnel are clear.
Do not attempt to move any objects away from moving parts.
Keep hands, feet, clothing, and objects away from moving parts.
Do not grease or oil equipment when in operation.
BEFORE TRANSPORT
Empty auger and secure into the transport position before transporting.
To Next Page
Loading...