EasyManua.ls Logo

Kind K - K models Specifications; Power Output and Performance; Input and Circuitry Details; Protection, Cooling, and Mains Supply

Kind K
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power output per channel RMS
1KHz (1% THD) both channels driven
Bridge MONO
Distortion (THD)
Frequency response
Input sensitivity (unbalanced)
Input impedance
Signal-to-Noise Ratio
Slew rate
Damping factor 8 10Hz to 1KHz
Input connectors
Output connectors
General protection
Cooling
Mains supply
Power requirement 230V (40% Duty Cycle/2
)
Dimension WxHxD / U rack 19"
Weight Kg.
483x133x453 / 3U (without handle)
115/230VAC ±10% 50 - 60Hz internally set by voltage links.
Electronic protection against output short, open circuit and load mismatch condition.
Thermal protection against heatsink over temperature (inadequate ventilation), automatic re-set.
Relays controlled delayed turn-on, load protection and prevents inrush current surges.
n 2 SPEAKON output with both channels wired (bi-wiring) and n 1 central SPEAKON for bridge mono output
Balanced: XLR 3-31 male and female (Pin 2 Hot) per channel.
Greather than -96dB ref. full output power, 20Hz to 20 KHz.
20 K Balanced.
+4dB (1.2V) input for full output power into a 4 load.
10 Hz to 30 KHz +0, -1.0dB.
Indicators
Plug-in cards to mount on moveable input board:
LC1 card Limiter with adjustable compression
FC1 card Hi/Low pass filter 120Hz (variable by component satatus)/18dB oct, Horn EQ +-12dB, adjustable output +7/-10dB
AUX card usable by the customer to personalize the input signal as desire, creating a own circuitry
Options
25VµS
K5
K9 K12
K18
1200W
850W
700W
14net/17 packed
19net/22 packed
22net/25 packed
Single fan and single tunnel; fan on the rear with electronic variable speed (front exhausting)
>300
<0.05
300W / 8
450W / 4
550W / 2
900W / 8
1100W / 4
<0.05
400W / 8
600W / 4
750W / 2
1200W / 8
1400W / 4
<0.05
500W / 8
800W / 4
1000W / 2
1600W / 8
2000W / 4
LED's for: Active, Prot/Temp, Signal, Clip/Limit
16net/19 packed
180W / 8
250W / 4
350W / 2
500W / 8
700W / 4
450W
<0.05
KQ
1000W
22net/25 packed
<0.05
4x250W / 8
4x400W / 4
2x800W / 8
Circuitry
Bipolar Class AB
Limiter
Real-Load Peak limiter, switchable, standard on all units
K models Specifications
KIND is a trademark of
AUDIO & AUDIO GROUP S.r.l.
Via Montello, 19 - I-28066 Galliate (NO) ITALY
Tel. +39 0321/865271 - Fax +39 0321/861674
e-mail: info@kindaudio.com
www.kindaudio.com
In line with development policy specifications may change without future notice.
We made our best to guarantee the information accuracy included on this publication, the AUDIO & AUDIO GROUP don’t undertake responsibility for mistakes or impresions.
V 1.2 © 2000 AUDIO & AUDIO GROUP S.r.l.All rights reserved. Printed in Italy 02/00.

Related product manuals