To Next PageTo Next Page
Need help?Do you have a question about the Kind K and is the answer not in the manual?
Guidelines for safe operation, handling, and environmental considerations.
Precautions regarding power connections, voltage, and grounding.
Advice on proper usage, ventilation, and amplifier protection features.
Instructions on obtaining technical service and support.
Details warranty terms, disclaimers, and coverage for KIND K model amplifiers.
Instructions for checking the amplifier upon arrival and handling packaging.
Guidance on rack mounting and selecting suitable operating locations.
Detailed description of front panel controls, indicators, and ports.
Explanation of rear panel connectors, switches, and input options.
Details on fan exhaust ports and their importance for ventilation.
Configuring and using the amplifier in stereo mode for independent channels.
Instructions for operating the amplifier in bridged mono configuration.
Guidance on sending the same signal to both channels for parallel operation.
Utilizing the parallel mono feature to double power at half impedance.
Advice on using flexible cables and understanding resistance for optimal sound.
Visual guide for connecting speakers and signal sources in stereo mode.
Diagram illustrating connections for bridged mono operation.
Diagram showing how to connect signals for parallel input configurations.
Visual guide for parallel mono output connections and important notes.
Explanation of the limiter switch and its role in protecting speakers.
Details on how the amplifier protects against overheating and output shorts.
How the amplifier detects and protects against DC voltage at the output terminals.
Charts detailing power loss based on cable length, section, and load impedance.
Technical specifications including power output, distortion, and frequency response.
Specifications for input sensitivity, impedance, signal-to-noise, and circuitry type.
Details on protection features, cooling methods, and power requirements.
Information on available options, physical dimensions, and unit weight.
Power Output| power_output_per_channel_RMS_8Ω | 180W |
|---|---|
| power_output_per_channel_RMS_4Ω | 250W |
| power_output_per_channel_RMS_2Ω | 350W |
| bridge_mono_8Ω | 500W |
| bridge_mono_4Ω | 700W |
General Specifications| distortion_THD | <0.05 |
|---|---|
| frequency_response | 10 Hz to 30 KHz +0, -1.0dB |
| input_sensitivity_unbalanced | +4dB (1.2V) |
| input_impedance | 20 KΩ Balanced |
| signal_to_noise_ratio | Greater than -96dB |
| slew_rate | 25VµS |
| damping_factor_8Ω_10Hz_to_1KHz | >300 |
Power Requirements| mains_supply | 115/230VAC ±10% 50 - 60Hz |
|---|---|
| power_requirement_230V_40%_Duty_Cycle_2Ω | 450W |
Physical Characteristics| dimension_WxHxD_U_rack_19 | 483x133x453 / 3U |
|---|---|
| weight_net | 14 kg |
| weight_packed | 17 kg |
Power Output| power_output_per_channel_RMS_8Ω | 300W |
|---|---|
| power_output_per_channel_RMS_4Ω | 450W |
| power_output_per_channel_RMS_2Ω | 550W |
| bridge_mono_8Ω | 900W |
| bridge_mono_4Ω | 1100W |
General Specifications| distortion_THD | <0.05 |
|---|---|
| frequency_response | 10 Hz to 30 KHz +0, -1.0dB |
| input_sensitivity_unbalanced | +4dB (1.2V) |
| input_impedance | 20 KΩ Balanced |
| signal_to_noise_ratio | Greater than -96dB |
| slew_rate | 25VµS |
| damping_factor_8Ω_10Hz_to_1KHz | >300 |
Power Requirements| mains_supply | 115/230VAC ±10% 50 - 60Hz |
|---|---|
| power_requirement_230V_40%_Duty_Cycle_2Ω | 700W |
Physical Characteristics| dimension_WxHxD_U_rack_19 | 483x133x453 / 3U |
|---|---|
| weight_net | 16 kg |
| weight_packed | 19 kg |
Power Output| power_output_per_channel_RMS_8Ω | 400W |
|---|---|
| power_output_per_channel_RMS_4Ω | 600W |
| power_output_per_channel_RMS_2Ω | 750W |
| bridge_mono_8Ω | 1200W |
| bridge_mono_4Ω | 1400W |
General Specifications| distortion_THD | <0.05 |
|---|---|
| frequency_response | 10 Hz to 30 KHz +0, -1.0dB |
| input_sensitivity_unbalanced | +4dB (1.2V) |
| input_impedance | 20 KΩ Balanced |
| signal_to_noise_ratio | Greater than -96dB |
| slew_rate | 25VµS |
| damping_factor_8Ω_10Hz_to_1KHz | >300 |
Power Requirements| mains_supply | 115/230VAC ±10% 50 - 60Hz |
|---|---|
| power_requirement_230V_40%_Duty_Cycle_2Ω | 850W |
Physical Characteristics| dimension_WxHxD_U_rack_19 | 483x133x453 / 3U |
|---|---|
| weight_net | 19 kg |
| weight_packed | 22 kg |
Power Output| power_output_per_channel_RMS_8Ω | 500W |
|---|---|
| power_output_per_channel_RMS_4Ω | 800W |
| power_output_per_channel_RMS_2Ω | 1000W |
| bridge_mono_8Ω | 1600W |
| bridge_mono_4Ω | 2000W |
General Specifications| distortion_THD | <0.05 |
|---|---|
| frequency_response | 10 Hz to 30 KHz +0, -1.0dB |
| input_sensitivity_unbalanced | +4dB (1.2V) |
| input_impedance | 20 KΩ Balanced |
| signal_to_noise_ratio | Greater than -96dB |
| slew_rate | 25VµS |
| damping_factor_8Ω_10Hz_to_1KHz | >300 |
Power Requirements| mains_supply | 115/230VAC ±10% 50 - 60Hz |
|---|---|
| power_requirement_230V_40%_Duty_Cycle_2Ω | 1200W |
Physical Characteristics| dimension_WxHxD_U_rack_19 | 483x133x453 / 3U |
|---|---|
| weight_net | 22 kg |
| weight_packed | 25 kg |
Power Output| power_output_per_channel_RMS_8Ω | 4x250W |
|---|---|
| power_output_per_channel_RMS_4Ω | 4x400W |
| bridge_mono_8Ω | 2x800W |
General Specifications| distortion_THD | <0.05 |
|---|---|
| frequency_response | 10 Hz to 30 KHz +0, -1.0dB |
| input_sensitivity_unbalanced | +4dB (1.2V) |
| input_impedance | 20 KΩ Balanced |
| signal_to_noise_ratio | Greater than -96dB |
| slew_rate | 25VµS |
| damping_factor_8Ω_10Hz_to_1KHz | >300 |
Power Requirements| mains_supply | 115/230VAC ±10% 50 - 60Hz |
|---|---|
| power_requirement_230V_40%_Duty_Cycle_2Ω | 1000W |
Physical Characteristics| dimension_WxHxD_U_rack_19 | 483x133x453 / 3U |
|---|---|
| weight_net | 22 kg |
| weight_packed | 25 kg |
