Kinder Oasis HE - User Manual

Oasis HE
COAL EFFECT HIGH EFFICIENCY GAS FIRE
Installation, Maintenance & User Instructions
Hand these instructions to the owner following installation, they
must be retained for future reference.
Model No’s KHEC**MN, KHEC**SN & KHEC**RN2 are only for use on
Natural Gas (G20) at a supply pressure of 20 mbar in G.B. / I.E.
Model No’s KHEC**MP only for use on Propane Gas (G31) at a supply
pressure of 37 mbar in G.B. / I.E.
** denotes trim and fret variant

Summary

SECTION 1 INFORMATION AND REQUIREMENTS

1.0 APPLIANCE INFORMATION

Details about the fire's model, gas type, dimensions, and specifications.

1.1 CONDITIONS OF INSTALLATION

Legal and regulatory requirements for installing the gas fire correctly.

1.8 HEARTHS

Requirements for hearth materials, thickness, and dimensions for safe installation.

1.9 SPILLAGE MONITORING SYSTEM

Information and warnings about the fire's safety spillage monitoring system.

SECTION 2 INSTALLATION OF FIRE

2.2 INSTALLING THE FIRE BOX

Detailed instructions for fitting the firebox into the fireplace structure.

2.3 GAS TIGHTNESS AND INLET PRESSURE (MANUAL CONTROL MODELS)

Procedures for checking gas tightness and inlet pressure for manual control models.

SECTION 3 ASSEMBLING FUEL BED AND COMMISSIONING

3.1 ASSEMBLING THE CERAMICS AND FUEL BED

Step-by-step guide for correctly positioning ceramic fuel bed components.

3.2 LIGHTING THE APPLIANCE - MANUAL CONTROL MODELS

Instructions for lighting the fire using manual control models.

3.6 SETTING THE TIME, DATE & TEMPERATURE ON THE REMOTE HANDSET

How to configure the remote handset's time, date, and temperature settings.

3.7 LIGHTING THE FIRE - REMOTE CONTROL MODELS

Detailed steps for lighting the fire using the remote control unit.

SECTION 4 MAINTENANCE

Servicing Notes

General guidance and requirements for annual servicing of the gas fire.

4.1 REMOVING THE BURNER ASSEMBLY FROM THE FIRE. (MC MODELS)

Steps to remove the burner assembly for maintenance on Manual Control models.

4.5 REMOVAL OF THE BURNER ASSEMBLY (SC MODELS)

Steps to remove the burner assembly for maintenance on Slide Control models.

Section 5

5.1 REMOVING THE RC BURNER ASSEMBLY (RC MODELS)

Steps to remove the burner assembly for maintenance on Remote Control models.

5.4 REPLACING THE BATTERIES (RC MODELS)

Guide for replacing batteries in the remote control models.

SECTION SIX - USER INSTRUCTIONS

6.1 INSTALLATION INFORMATION

Overview of installation conditions and appliance manufacturer details.

6.2 OPERATING THE FIRE (MANUAL CONTROL MODELS)

Step-by-step guide for operating the fire with manual controls.

6.2.3 LIGHTING THE FIRE - REMOTE CONTROL MODELS

Instructions for lighting the fire using the remote control unit.

6.6 SPILLAGE MONITORING SYSTEM - APPLICABLE TO ALL MODELS

Explains the function and behaviour of the spillage monitoring system.

6.12 REMOVING AND RE-FITTING THE GLASS PANEL

Step-by-step instructions for removing and refitting the glass panel.

TROUBLE SHOOTING ADVICE FOR REMOTE CONTROL & ELECTRONIC FIRE CONTROL MODELS PRIOR TO REQUESTING A SERVICE CALL

Kinder Oasis HE Specifications

General

Control Type	Remote Control
Adjustable Thermostat	Yes
Overheat Protection	Yes
Style	Contemporary
Remote Control	Included
Timer	Yes