Kinder Oasis HE - Fitting the Trim; Fret or Fascia

3.9 FITTING THE TRIMS & FRETS OR FASCIA’S
Models supplied with one piece trim & Fret / Ashpan Cover
3.9.1 Fit the outer trim assembly to the firebox with the magnets
provided.
3.9.2 Remove the fret & ashpan cover from the packaging.
Place fret up to the front radiused burner heat shield
3.9.3 Place ashpan cover under fret assembly and centralise.
Models supplied with fascia’s
3.9.4 Refer to the fitting instructions supplied with the fascia for advice on
removal / re-fitting.
NOTE : Some models in this range are not supplied with a fret from the
factory, therefore please consult your local retailer for fitting
advice on the type of fret supplied with these models.
41