3.3.3 After lighting, move control lever up to the high position and the main
burner will light. For most efficient performance leave the fire on
high when lighting from cold for ten minutes.
3.3.4 The gas control can be moved from the High to Low position to give the
desired heat output.
3.3.5 To turn the fire off, FULLY raise the control lever to the OFF position.
WARNING : If the fire goes out for any reason or is turned off and it
is necessary to re-light the fire it is important to allow the
fire to cool for 3 minutes before attempting to re-light it.
26
To Next Page
Loading...
