CONTENTS
Section 1 Information and Requirements PAGE
1.0 Appliance Information 3
1.1 Conditions of Installation 4
1.2 Flue and chimney suitability 4
1.3 Fireplace / surround suitability 5
1.4 Shelf position 5
1.5 Chimney inspection 5
1.6 Fire place opening / catchment space 6
1.7 Fitting to Metal Flue Boxes 8
1.8 Hearths 8
1.9 Spillage Monitoring System 9
Section 2 Installation of Fire
2.1 Unpacking the fire 9
2.2 Installing the fire box 9-17
2.3 Gas tightness and inlet pressure (MC models) 18
2.4 Gas tightness and inlet pressure (SC models) 18
Section 3 Assembling Fuel Bed and Commissioning
3.1 Assembling the ceramics and fuel bed 19-22
3.2 Lighting the appliance (Manual Control model) 23
3.3 Lighting the appliance (Slide Control model) 23-24
3.4 Checking for clearance of combustion
products 24
Section 4 Maintenance
4.1
Removal of the Burner
Assembly (Manual) 25
4.2 Removal of the Piezo Igniter 25
4.3 Removal of the Control Tap 26
4.4 Removal of the Pilot Assembly 26
4.5 Removal of the Burner Assembly (Slide) 26-27
4.6 Removal of the Battery Ignitor 27
4.7 Repacing the Battery 28
4.8 Removing the Oxy-Pilot Assembly 28
4.9 Replacing the Control Cable 28-29
This appliance is manufactured by:-
BFM Europe Ltd, Trentham Lakes, Stoke-on-Trent, ST4 4TJ
2
To Next Page
Loading...
