EasyManua.ls Logo

Kinesis RANGE User Manual

Kinesis RANGE
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Kinesis RANGE and is the answer not in the manual?

Kinesis RANGE Specifications

General IconGeneral
BrandKinesis
ModelRANGE
CategoryBicycle
LanguageEnglish

Summary

Warnings and Important Information

EPAC Regulations and Rider Age

EPAC regulations limit speed to 15.5mph; riders must be 14+.

Public Road Usage Requirements

Prepare bicycle for public roads, follow local traffic laws and regulations.

Off-Road Riding Risks and Precautions

Off-road riding is dangerous; accept risks, ride with caution, check equipment.

Essential Safety Gear

Always wear safety gear: helmet, gloves, visible clothing, appropriate footwear, eyewear.

Important Notices and Warnings

Vision and Control Obstructions

Avoid obstructions to vision/control; prevent entanglement with moving parts.

Stem and Handlebar Connection

Firm stem/handlebar connection is critical for steering control and safety.

Seat Post Insertion Limit

Seat post must not exceed minimum insertion mark to prevent frame failure.

Child Helmet Safety Guidelines

Child must wear helmet only when riding; remove when not riding.

Assembly Warnings and Steps

Use of Original Parts and Warranty

Use only original parts; non-original parts void warranty and risk injury.

Assembling Your Range Bike

Handlebar Alignment and Torque

Adjust handlebars: align stem, torque bolts to 6Nm.

Bike Assembly Procedures

Pedal Installation Instructions

Fit pedals: use grease, ensure correct side, torque to 30-34Nm.

Saddle Height Adjustment Guide

Adjust saddle height for optimal performance and comfort.

Seat Post Height Adjustment

Adjust seatpost height: loosen clamp, set height, re-tighten to 5Nm.

Seat Post Insertion Safety Rule

Ensure seat post does not exceed minimum insertion mark to prevent frame failure.

Final Assembly Steps

Pre-Ride Torque and Pressure Checks

Perform final checks: read Fazua manual, check torque settings, tyre pressure.

General Riding Information and Safety

Riding Cautiousness and Visibility

Riding requires caution, visibility, helmet use, and awareness of terrain.

Wheel Security and Wobble Warning

Improperly secured wheels can cause wobbling or disengagement, leading to injury.

Chainring and Moving Parts Hazard

Keep fingers away from spinning chain and chainring to prevent crushing injury.

Importance of Pre-Ride Checks

Perform pre-ride checks, maintain bike, avoid touching moving parts, follow off-road rules.

Riding Safety and Precautions

Progressive Braking Technique

Learn to use brakes progressively; aggressive use can cause crashes.

Bicycle Brakes Explained

Brake Safety and Wear Issues

Improperly adjusted brakes, worn pads, or rim wear are hazardous.

Steering System Components and Safety

Steering System Assembly Criticality

Proper steering system assembly and function are critical for safety.

General Pre-Ride Safety Checklist

Riding Prohibition with Defects

Do not ride if any defects are noticed.

Front Wheel Fitting Procedure

Warranty Terms and Conditions

Warranty Coverage and Duration

2-year warranty on bikes, 5-year on frames for material/workmanship defects.

Defect Reporting and Immediate Action

Report defects within 14 days; stop using damaged bikes to avoid voiding warranty/further damage.

Warranty Exclusions and Legal Information

Conditions That Void Warranty

Warranty void if card incomplete, modifications made, or improper assembly/maintenance.