10
Maintaining Your Water System
Your Kinetico water system is engineered to provide you with quality water
without requiring extensive maintenance. However, some routine maintenance
is necessary to keep your system working properly.
Changing the Filter
Your Kinetico system may be equipped with an in-line filter to remove solid
material from the inlet water supply. Periodically, the filter cartridge will
require replacement. is should occur when the water pressure in the home
begins to gradually decrease. e frequency of the filter change is determined
by the amount of water used and the solid material content of your water
supply.
Procedure
1. Turn off the feed water to the filter by turning the by-pass valve
1
to the BY-
PASS position*.
2. Slowly turn the handle on the pressure relief valve
2
to the OPEN
position**. Allow at least one minute for system to depressurize and to
minimize spillage.
Open
Closed
O
On
2
1
5
3
6
4
To Next Page
Loading...
Need help?
General
