Need help?Do you have a question about the King Canada 8370 and is the answer not in the manual?
General| Motor | 15 A, 120 V, 60 Hz |
|---|---|
| Blade Diameter | 10 inch |
| Arbor Size | 5/8 inch |
| Bevel Capacity | 0-45° |
| Dust Port | 2-1/2 inch |
Details King Canada's 2-year limited warranty terms, exclusions, and procedures for non-commercial use.
Instructions to keep dated proof of purchase for warranty and servicing purposes.
Information on obtaining replacement parts and where to find parts diagrams and lists.
Crucial safety advice on matching voltage and proper grounding for the tool.
Maintain a clean area, avoid hazards, keep children away, and never leave the machine unattended.
Proper usage, apparel, tool care, accessory use, and checking for damaged parts are essential.
Use correct blades, avoid cutting metal/masonry, and do not re-cut small pieces.
Always clamp workpieces, keep hands clear of the blade, and support long pieces.
Follow correct operating steps, perform checks, disconnect power for safety, and clean up.
Emphasizes qualified electricians for connections, correct voltage, and circuit requirements.
Advises on selecting appropriate wire gauge for extension cords based on length.
Lists key technical specifications of the miter saw, including model and dimensions.
Steps for unpacking, releasing the arm, and assembling basic controls like the miter lock knob.
Instructions for installing the vise and extension wings for increased functionality.
Explains the use of the spindle lock button for safe blade installation and removal.
Details the self-retracting blade guard and proper dust bag usage for safety and efficiency.
How to adjust the depth of cut stop to control cutting depth into the workpiece.
Guides on securely mounting the saw to a workbench for stability.
Critical safety warnings regarding blade size, thickness, and cutting materials.
Step-by-step guide for safely removing and installing a saw blade.
Procedure to ensure the miter table is square to the blade for accurate cuts.
Instructions for performing basic crosscuts and miter crosscuts accurately.
Detailed steps for making precise bevel cuts using the saw.
Guide for making compound miter cuts for frames, mouldings, and complex joints.
How to use, align, and adjust the laser guide system for precise cut lines.
Instructions for opening the cover and replacing batteries in the laser guide system.
Covers cleaning, lubrication, and the procedure for replacing worn carbon brushes.
To Next Page
