Need help?Do you have a question about the King Canada KC-150C and is the answer not in the manual?
General| Brand | King Canada |
|---|---|
| Model | KC-150C |
| Category | Power Tool |
| Language | English |
Details the 2-year limited warranty for the jointer.
Requirement to keep dated proof of purchase for warranty and servicing.
Understand the manual, labels, applications, limitations, and hazards.
Ensure proper grounding via 3-conductor cord and plug.
Avoid modifications, as they can create dangerous conditions.
Verify voltage matches tool specifications to prevent damage or injury.
Instructions for assembling the jointer stand components.
Guides for mounting the motor and switch onto the stand.
Securing the jointer unit onto the assembled stand.
Instructions for attaching the dust chute cover.
Attaching the motor pulley to the motor shaft.
Installing the belt, aligning pulleys, and setting correct belt tension.
Instructions for assembling and attaching the jointer fence.
Steps to install the guard over the cutterhead.
Specifies requirements for the power supply circuit and fuse/breaker.
Explains the importance of proper grounding for safety.
How to operate the main power switch.
How to raise, lower, and set the infeed table depth.
Adjusting stops to limit infeed table height and depth.
Leveling the outfeed table with the cutterhead knives.
Adjusting gibs to remove play in table dovetail ways.
Moving and tilting the fence across the table.
Setting positive stops for 90° and 45° fence angles.
Adjusting the guards that close openings around the fence.
Procedures for safely handling and installing cutterhead knives.
To Next Page
