King Canada 8367 User Manual

COPYRIGHT © 2004
ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
3-1/4 HP VARIABLE SPEED
PLUNGE ROUTER
plusplus
performanceperformance
INSTRUCTION MANUAL
MODEL: 8367
IMPORTANT INFORMATION
2-YEAR
LIMITED WARRANTY
FOR THIS PLUNGE ROUTER
KING CANADA TOOLS
OFFERS A 2-YEAR LIMITED WARANTY
FOR NON-COMMERCIAL USE.
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
LIMITED TOOL WARRANTY
KING CANADA makes every effort to ensure that this product meets high quality
and durability standards. KING CANADA warrants to the original retail consumer a
2-year limited warranty as of the date the product was purchased at retail and that
each product is free from defects in materials. Warranty does not apply to defects
due directly or indirectly to misuse, abuse, negligence or accidents, repairs or
alterations and lack of maintenance. KING CANADA shall in no event be liable for
death, injuries to persons or property or for incidental, special or consequential
damages arising from the use of our products. To take advantage of this warranty,
the product or part must be returned for examination by the retailer. Shipping and
handling charges may apply. If a defect is found, KING CANADA will either repair
or replace the product.

King Canada 8367 Specifications

General

Brand	King Canada
Model	8367
Category	Power Tool
Language	English

Summary

Important Information

Limited Tool Warranty

KING CANADA warrants the product for 2 years against defects in materials.

Proof of Purchase

Keep dated proof of purchase for warranty and servicing purposes.

Specific Safety Rules

Safe Operating Procedures

Essential guidelines for safe tool operation, including handling and workpiece preparation.

Specifications and Electrical Information

Technical Specifications

Details router capacity, speeds, voltage, and amperage requirements.

Extension Cord Usage

Guidance on selecting appropriate extension cords based on length and gauge.

Getting to Know Your Router

Router Component Identification

Identifies and labels the various parts of the router with a detailed diagram.

Adjustments

Adjusting the Depth of Cut

Instructions on how to set and measure the desired cutting depth.

Adjusting Depth Stops

Setting multiple preset depths for quick changes without readjustment.

Operation

Variable Speed Selection

Explanation of how to use the speed selection dial for optimal settings.

Installing or Removing Router Bit

Procedure for securely installing and removing router bits using provided tools.

Edge Guide Usage

How to install and use the edge guide for straight cuts and chamfering.

Template Guide Usage

Instructions for using the template guide with patterns for precise cuts.

Trim Guide Usage

How to install and use the trim guide for curved cuts and furniture trimming.

Operation (Continued)

Turning On Your Router

How to start, stop, and use the lock-on feature for continuous operation.

Dust Collection Port

Information on using the dust collection port and recommended accessories.

Maintenance

Replacing Carbon Brushes

Procedure for checking and replacing worn carbon brushes for tool longevity.

Cleaning and Solvents

Warning about cleaning agents that can damage plastic parts.