Need help?Do you have a question about the King Industrial KC-2244DS and is the answer not in the manual?
General| Model | KC-2244DS |
|---|---|
| Category | Sander |
| Voltage | 120V |
| Type | Belt/Disc Sander |
| Table Tilt | 0-45 degrees |
| Disc Diameter | 12 inches |
| Belt Size | 6" x 48" |
| Disc Speed | 1720 RPM |
| Dust Port Size | 2.5 inches |
General safety principles and practices for operating power tools safely.
Specific safety warnings and precautions for this drum sander.
Guidance on connecting the sander to a proper power source and grounding.
Procedure for aligning the sanding drum for optimal performance.
Determining and setting the correct depth of cut for sanding.
How to control and adjust the feed belt speed for best results.
Step-by-step guide for replacing the sanding belt on the drum.
To Next Page
