Need help?Do you have a question about the King Industrial KC-351S and is the answer not in the manual?
Details the 2-year limited warranty for the industrial woodworking shaper.
Instructions to keep dated proof of purchase for warranty and servicing.
Information on obtaining replacement parts through authorized service centers.
Specifies KING CANADA's 1-year limited warranty against defects in materials.
Guidance to find updated parts diagrams and lists on the King Canada website.
Essential safety guidelines for operating power tools, including PPE and work area cleanliness.
Crucial safety rules specific to operating woodworking shapers, covering setup, operation, and adjustments.
Critical safety warnings regarding electrical connections, grounding, and proper use of power sources.
Information on the 220V power supply requirements and guidelines for using extension cords.
Detailed technical specifications for the KC-351S woodworking shaper.
Identification and brief description of the various parts and features of the shaper.
Listing of standard included accessories and available optional accessories for the shaper.
Instructions for safely unpacking, cleaning protective oil, and preparing the shaper.
Step-by-step guide to attaching and leveling the extension table for increased work surface.
Instructions for installing the steel handle onto the handwheel assembly.
Detailed steps for installing the magnetic switch onto the front of the shaper cabinet.
Procedure for resurfacing the fence to ensure parallelism and squareness with the table.
Guide to adjusting the two-piece fence system for proper workpiece support and cut depth.
Instructions for safely removing and installing different spindle sizes.
Steps for mounting cutters onto the spindle, including spacer and nut usage.
Guidance on using rub collars for shaping, including selection criteria.
Illustrates and explains the configuration with a rub collar positioned below the cutter.
Illustrates and explains the configuration with a rub collar positioned above the cutter.
Illustrates and explains the configuration with a rub collar between two cutters.
Procedure for ensuring table inserts are flush with the table surface.
Steps for setting and locking the cutter height using handwheels.
Instructions for adjusting belt positions to change between spindle speeds.
Explanation of how to operate the magnetic switch and forward/reverse control.
Tips and best practices for operating the shaper, including feed direction and safety.
Guidance on routine cleaning, cutter sharpness, and sealed bearing lubrication.
Recommendations for checking V-belt tension, condition, and replacement.
General| Brand | King Industrial |
|---|---|
| Model | KC-351S |
| Category | Power Tool |
| Language | English |
To Next Page
