King Industrial KC-60FX - User Manual

6’’ WOODWORKING
JOINTER
INSTRUCTION MANUAL
MODEL: KC-60FX
COPYRIGHT 2000 BY KING CANADA TOOLS INC.

Summary

General Safety Rules for Woodworking Jointer

Jointer-Specific Safety Rules and Precautions

Unpacking the Woodworking Jointer

Cleaning the Jointer After Unpacking

King KC-60 FX Jointer Parts Identification

King KC-60 FX Jointer Technical Specifications

Contents of the Loose Parts Bag

Safe Power Connections for the Jointer

Proper Grounding of the Jointer

Using Extension Cords with the Jointer

Changing Jointer Voltage (110 V to 220 V)

Starting and Stopping the Jointer Machine

Adjusting the Jointers Depth of Cut

Understanding the Depth of Cut Limit

Mounting the Jointer Unit onto the Stand

Mounting the Motor onto the Jointer Stand

Mounting the Fence onto the Jointer Table

Setting the Jointer Fence at a 90° Angle

Tilting the Jointer Fence for Angled Cuts

Replacing the Jointer Knives Safely

Adjusting Jointer Knife Height

Aligning Jointer Knives and Outfeed Table

Mounting the Motor Pulley

Mounting and Aligning the V-Belt

Mounting the V-Belt Guard

Mounting the Cutterhead Guard

Adjusting the V-Belt Tension

Adjusting the Jointer Gibs for Smooth Operation

Attaching the Optional Dust Chute

Jointer Operations: Jointing and Planing

Jointing Operations Guide

How to square the edge of a workpiece using a jointing cut on the jointer.

Planing Operations Guide

Techniques for planing the wider flat surface of a workpiece using the jointer.

Performing Rabbet Cuts on the Jointer

Making a Simple Push Stick

Recommended Push Block for Jointer Use

King Industrial KC-60FX Specifications

General

Brand	King Industrial
Model	KC-60FX
Category	Power Tool
Language	English