Page 5
The Wall Mount Power Injector:
• Can be mounted in most standard electrical boxes.
• Requires a +12 Volt DC power source. (Inadequate voltage may cause the green LED to not illuminate and the unit to
not function properly.
• Requires #10-12 female spade connectors for power and ground connections.
• Has an internal fuse rated @ 400 mA max. If tripped, the fuse will reset when the circuit cools.
• Is not an amplier. No devices other than those shown below should be connected.
IMPORTANT!
Make sure power injector is turned off
(button not depressed)
while making connections.
POWER INJECTOR INSTALLATION
KING SureLock™ Digital TV Signal Meter (Sold separately)
The optional KING SureLock Digital TV Signal Meter allows you to pinpoint the
location of local DTV towers and eliminate the need for multiple channel scans.
It also allows you to more accurately locate distant towers that might be missed
with the 4 quadrant scan.
Consult your local dealer or visit kingconnect.com for additional information.
KING SureLock SL1000