King Pigeon RTU5028 - Inquiry Current Status; Setup PING Device IP

Page
16
of
22
King Pigeon Hi-Tech. Co., Ltd. Ver 1.0
GSM/GPRS/3G/4G/Cloud
Network Fault Monitoring Alarm
report)
Inquiry
PWD+DT
10) Inquiry Current Status
Command
Return SMS
Inquiry
PWD+EE
Note:Only set to Ping device IP and internet IP,the
return SMS will contain network device 1~7 and
internet status
Current time;
Device Name;
External Power Normal/Failure/Voltage Higher:
Current value;
Device 1:Normal/Fault
Device 2:Normal/Fault
Device 3:Normal/Fault
Device 4:Normal/Fault
Device 5:Normal/Fault
Device 6:Normal/Fault
Device 7:Normal/Fault
Internet:Normal/Fault
Network cable:Normal/Fault
GSM Signal Value:
IMEI:
Model:
Version:
11) Setup continue to call next authorize number,even answering if without press a key(avoid alarm calling is
transferred to voicemail leads to user missed alarm reminding)
Command
Return SMS
Not continue
dialing (Default)
PWD+COFF#
Once anyone answered, the device will not call next authorized
number,if nobody answer will circular dialing for 3 times .
Set successfully
Continue dialing
PWD+CON#
After answering, the device will continue to call next authorize
number without pressing the key on the phone,press * or # will
stop calling next authorize number
Set successfully
12) Setup Relay output
Command
Return SMS
Close Relay
PWD+CC
relay close
Open Relay
PWD+DD
relay open
13) Setup PING Device IP
Command
Return SMS
Example
PWD+PINGIP+x=y
(x=1~7,stands network device
1~7,y stands for IP address)
IPx:y
1234PINGIP1=192.168.1.188
to set device 1 IP address as 192.168.1.188.
Inquiry
PWD+PINGIP+x
Delete
PWD+PINGIPDEL+x