To Next PageTo Next Page
Need help?Do you have a question about the King Pigeon RTU5034 and is the answer not in the manual?
General| Model | RTU5034 |
|---|---|
| Communication | GSM |
| GSM Frequency | 900/1800 MHz |
| SIM Card | Standard SIM |
| Antenna | External antenna |
| Digital Input | Yes |
| Relay Output | Yes |
| Power Supply | 12-24V DC |
| Operating Temperature | -20~+60 °C |
| Relative Humidity | Relative humidity 95% (non-condensing) |
Key advantages and functionalities of the RTU5034 GSM Gate Opener, including quad-band support and remote operation.
Technical specifications of the RTU5034, covering GSM frequency, power, dimensions, and operating environment.
Physical dimensions of the RTU5034 unit, including width, depth, and height for installation planning.
List of items included in the RTU5034 package, such as the gate opener unit, antenna, and user manual.
Various applications for the RTU5034, including residential, industrial, and agricultural use for remote control.
Precautions for safe startup and operation, avoiding GSM interference and potential dangers.
Information on potential interference from other wireless equipment affecting the Gate Opener's performance.
Warning against using the Gate Opener at gas stations due to fire hazards with fuels or chemicals.
Instruction to power off the device near blasting locations, following relevant safety regulations.
Guidelines for installing the product in suitable locations to avoid signal shielding and ensure optimal performance.
Requirement for maintenance to be performed only by qualified and certified personnel for safety and functionality.
Explanation of the indicator lights on the RTU5034, detailing their meaning for relay status and network connection.
Description of the connection terminals on the RTU5034, including power input and relay output ports.
Wiring diagram and instructions for connecting the RTU5034 to a gate opener and electronic lock for remote control.
Wiring diagram and instructions for using the RTU5034 to remotely switch other equipment like pumps or motors.
Important notices regarding password, SMS commands, relay behavior, and command formatting for RTU5034.
Troubleshooting steps for when the alarm panel does not send SMS alerts, focusing on country code configuration.
Troubleshooting for inbound command issues, suggesting adding country codes to SIM card numbers for SMS communication.
Guidance on using phone numbers correctly for SMS alerts and commands, including handling country codes and '+' prefixes.
Security advice for commands, emphasizing correct format, CAPS LOCK, and absence of spaces for error-free operation.
Information on downloading the dedicated smartphone APP for easier configuration and control of the RTU5034.
Step-by-step instruction for installing the SIM card into the RTU5034 unit before initial setup and operation.
Procedure for the mandatory initial setup of the RTU5034, including setting the phone number and adjusting the time.
Instructions on how to change the default password for enhanced security of the RTU5034 system.
Management of authorized users, including adding, inquiring, and deleting numbers for device access.
Guide on adding authorized phone numbers to the RTU5034, specifying serial numbers, start, and end times.
Method to inquire about the stored authorized user numbers based on their serial position in the RTU5034 memory.
Procedure to query multiple authorized users by specifying a range of serial numbers for batch retrieval.
Instructions for deleting an authorized user's number from the RTU5034, or overwriting an existing entry.
Configuration options for controlling the relay's behavior, including access permissions and timing.
Configuration to permit any phone number to control the RTU5034 relay via a call, disabling caller-ID security.
Setting to enable caller-ID verification, allowing only pre-authorized numbers to control the relay.
Setting the duration for which the relay remains closed (ON) after a control call, measured in seconds.
Configuration to define who receives confirmation SMS for relay ON/OFF events and the content of the message.
Setting to disable confirmation SMS messages when the relay state changes (ON or OFF).
Commands to directly control the relay state (ON/OFF) using SMS messages.
Additional settings and inquiry functions for the RTU5034, including self-checks and status reports.
Configuration for automatic status reporting via SMS, including relay status and GSM signal quality.
Command to retrieve the current operational status of the RTU5034 device.
Procedure to check the GSM module's IMEI code and the device's current firmware version.
Instructions for resetting the RTU5034 to default settings, including password and parameters.
Emphasizes the importance of reading the user manual thoroughly before installation and operation.
Recommendation to install the RTU5034 unit in a hidden or discreet location.
Warning to prevent water from entering the RTU5034 unit to avoid damage or malfunction.
Requirement to ensure a secure and reliable connection to the main power supply for the RTU5034.
Steps to take in case of RTU5034 failure, including contacting the distributor or manufacturer.
Troubleshooting for SMS sending failures, suggesting power cycling, checking settings, or changing SIM card.
Advice to contact the distributor or manufacturer if problems cannot be resolved through troubleshooting steps.
Details the one-year warranty period for the RTU5034 against defects in material and workmanship.
Specifies conditions under which the warranty is void, such as abuse, misuse, or alterations by purchasers.
A printable table for recording authorized user details like position, phone number, name, and access type.
