EasyManua.ls Logo

King Pigeon S140 - User Manual

King Pigeon S140
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Remote switching machines with a SMS text from your mobile phone!
Remote Monitoring your assets in the worldwide by your mobile Phone!
GSM SMS Controller
GSM SMS Alarm Unit
S130 S140 S150
User Manual
Ver 1.50 Date Issued: 2011-04-06
Table of contents
1. Brief introduction ----------------------------------------------------------------------------3

Table of Contents

Questions and Answers

  • G
    gary94Aug 7, 2025
    What to do if King Pigeon Controller alarm has no SMS/Dial/No action after sending SMS?
    • T
      tammychungAug 8, 2025
      If the King Pigeon Controller alarms without sending SMS, dialing, or responding to SMS commands, here are a few things to check: * First, ensure you have correctly set up the SMS alert numbers. * Next, verify the format and content of your SMS commands, paying close attention to capitalization. * It's also worth trying a SIM card from a different GSM operator to rule out communication protocol issues. Please refer to the example to set up the telephone numbers.
  • A
    Amanda ClarkAug 12, 2025
    Why does my King Pigeon S140 Controller automatically restart?
    • D
      Daniel MartinAug 12, 2025
      If your King Pigeon Controller is restarting automatically, it might be due to a backup battery with low voltage. To resolve this, please ensure the controller is properly connected to AC power.
  • D
    Dennis BurkeAug 17, 2025
    What to do if King Pigeon S140 Controller gives false alarms?
    • V
      vanessabentonAug 17, 2025
      If your King Pigeon Controller is giving false alarms, consider the following: 1. Review the PIR motion detector installation user manual to ensure correct placement. 2. Verify the detector's NC/NO type and confirm that a 2.2K resistor is connected in series in any unused input ports.
  • K
    Kyle GallegosAug 22, 2025
    How to fix King Pigeon Controller GSM Module initialization failure?
    • M
      Michelle JacksonAug 22, 2025
      If the GSM Module initialization failed on your King Pigeon Controller, it could be due to several reasons: * A backup battery with low voltage. * A loose GSM/3G/4G Module connection. * A weak 3G/4G signal. To address this: 1. Connect the device to AC power. 2. Have a mobile phone repair technician check the GSM Module socket and connection. 3. Try installing the alarm panel in a different location.
  • C
    Chelsea BrownAug 27, 2025
    What to do if King Pigeon S140 Controller alarm doesn't send SMS, dial, or act after sending SMS?
    • M
      Mark ThompsonAug 27, 2025
      If your King Pigeon Controller isn't sending SMS alerts, dialing, or responding after you send an SMS, consider these potential causes and solutions: * Ensure you have correctly set up the SMS alert numbers. * Verify the SMS commands are in the correct format and that the Caps Lock is off. * The issue might be related to the GSM operator's communication protocol, so try using a SIM card from a different GSM operator to test.
  • Y
    Yesenia PaulSep 2, 2025
    What to do if King Pigeon S140 gives a false alarm?
    • S
      saradavidsonSep 2, 2025
      If your King Pigeon Controller is giving false alarms, consider the following: * Incorrect installation of the PIR motion detector might be the cause. Refer to the PIR motion detector's user manual for correct installation guidelines. * Incorrect NC/NO/EOL configuration could also trigger false alarms. Check the detector's NC/NO type and ensure a 2.2K resistor is connected in series in the unused input ports.

Summary

Safety Directions

Safe Startup and Interference

Covers safe startup, interference warnings, and general use guidelines.

Environmental and Usage Precautions

Precautions for gas stations, blasting areas, and proper installation.

Product Features

System Settings

Power and Setting Switch Operation

Details on using the internal power switch and setting switch for configuration.

PC Configurator Interface

COM Settings and Status

Configure COM port for communication and monitor serial port status.

Alarm and Notification Setup

Configure alarm dial numbers, SMS alert numbers, and related settings.

Function Table 1: PC Configurator Parameters

Com Setting and Communication Control

Select COM port and manage saving/loading of configuration settings.

Alarm Dial & SMS Alert Number Configuration

Configure phone numbers for alarm dial-out and SMS alerts.

Detailed PC Configurator Settings

Password Configuration

Set and verify the password for SMS command control.

Operating Instructions

Arm and Disarm System

Commands and procedures for arming and disarming the GSM SMS Controller.

Installation Guide

Detector Wiring Types

Advanced Wiring Configurations

Typical Application Example

Application Sample 1: Tank Monitoring

Application Sample 2: Tank Level Control

Application Sample 3: Environment Monitoring

Installation and Component Setup

Technical Specifications

Warranty Details

Troubleshooting

King Pigeon S140 Specifications

General IconGeneral
GSM Frequency850/900/1800/1900 MHz
Power supply12V DC
SIM CardStandard SIM Card
Working humidity range10% to 90% RH
Backup Battery3.7V 900mAh rechargeable lithium battery

Related product manuals