King Pigeon S150 - User Manual

Questions and Answers

W
wwilliamsAug 7, 2025
What to do if King Pigeon Controller alarm has no SMS/Dial/No action after sending SMS?
- R
  Rita Skinner DVMAug 8, 2025
  If the King Pigeon Controller alarms without sending SMS, dialing, or responding to SMS commands, here are a few things to check: * First, ensure you have correctly set up the SMS alert numbers. * Next, verify the format and content of your SMS commands, paying close attention to capitalization. * It's also worth trying a SIM card from a different GSM operator to rule out communication protocol issues. Please refer to the example to set up the telephone numbers.
K
Karla AndersonAug 12, 2025
Why does my King Pigeon S150 automatically restart?
- P
  patriciasmithAug 12, 2025
  If your King Pigeon Controller is restarting automatically, it might be due to a backup battery with low voltage. To resolve this, please ensure the controller is properly connected to AC power.
R
rachel46Aug 18, 2025
What to do if King Pigeon Controller gives false alarms?
- J
  John OliverAug 18, 2025
  If your King Pigeon Controller is giving false alarms, consider the following: 1. Review the PIR motion detector installation user manual to ensure correct placement. 2. Verify the detector's NC/NO type and confirm that a 2.2K resistor is connected in series in any unused input ports.
C
Cassandra YoderAug 22, 2025
How to fix King Pigeon S150 Controller GSM Module initialization failure?
- J
  Jason CortezAug 22, 2025
  If the GSM Module initialization failed on your King Pigeon Controller, it could be due to several reasons: * A backup battery with low voltage. * A loose GSM/3G/4G Module connection. * A weak 3G/4G signal. To address this: 1. Connect the device to AC power. 2. Have a mobile phone repair technician check the GSM Module socket and connection. 3. Try installing the alarm panel in a different location.
G
goodmanstaceyAug 28, 2025
What to do if King Pigeon Controller alarm doesn't send SMS, dial, or act after sending SMS?
- S
  Sean YoungAug 28, 2025
  If your King Pigeon Controller isn't sending SMS alerts, dialing, or responding after you send an SMS, consider these potential causes and solutions: * Ensure you have correctly set up the SMS alert numbers. * Verify the SMS commands are in the correct format and that the Caps Lock is off. * The issue might be related to the GSM operator's communication protocol, so try using a SIM card from a different GSM operator to test.
F
Felicia MartinezSep 1, 2025
What to do if King Pigeon S150 gives a false alarm?
- A
  Ashley HancockSep 1, 2025
  If your King Pigeon Controller is giving false alarms, consider the following: * Incorrect installation of the PIR motion detector might be the cause. Refer to the PIR motion detector's user manual for correct installation guidelines. * Incorrect NC/NO/EOL configuration could also trigger false alarms. Check the detector's NC/NO type and ensure a 2.2K resistor is connected in series in the unused input ports.