KING 8500 User Manual

USSC 1
ÌPlease read this entire manual before installation and use of this appliance. Failure to follow
these instructions could result in property damage, bodily injury, or even death.
Ì           
requirements in your area.
ÌSAVE THESE INSTRUCTIONS.
Owner’s Manual

FOR TECHNICAL ASSISTANCE: PHONE: (800) 750-2723 FAX: (423) 837-2109
UNITED STATES STOVE COMPANY
“Keeping North America Warm Since 1869”
MULTI-FUEL FURNACE MODEL 8500
Report #: 215-S-22b-2
TESTED &
LISTED BY
PORTLAND,
OREGON, USA
Part No.: 851976
Safety tested and listed to UL
391-2010, ASTM E1509-04,
and CSA-B366.1-11
C 
residential or mobile home as a
stand-alone or add-on furnace
(ductwork connection only).
Approved for
US and Canadian use.
French version is available for download from the U. S. Stove website: http://www.Breckwell.com/

KING 8500 Specifications

General

Brand	KING
Model	8500
Category	Furnace
Language	English

Summary

Safety Precautions

Installation Options and Clearances

Installation Options

Discusses installation in residential, manufactured, or mobile homes as primary or secondary furnace.

Clearances

Specifies required distances from walls, ceiling, and other objects for safe installation.

Floor Protection

Venting Requirements and Termination

Venting Requirements

Outlines general rules for connecting the vent system to the furnace.

Maximum Venting Distance

Specifies maximum horizontal and vertical pipe lengths and elbow limits.

Pellet Vent Type

Defines the approved type of pellet vent system for installation.

Pellet Vent Installation

Provides guidance on installing the pellet vent system, including clean-out tees and sealing.

Pellet Vent Termination

Details safe termination locations and clearances for the vent pipe.

Vent Termination Clearances

Furnace Installation Configurations

Through the Wall Installation

Through the Roof/Ceiling Installation

Primary Furnace

Secondary (Add-On) Furnace

Operation and Control Panel

Control Panel Overview

Describes the function of each button and display on the control panel.

Daily Operation and Lighting

Daily Operation

Lighting Instructions

Step-by-step guide on how to start the furnace fire.

Start-Up Procedure

Details the initial steps to get the furnace operational.

Shut-Down Procedure

Explains the correct method for turning off and safely shutting down the furnace.

Maintenance Procedures

Interior Chambers Cleaning

Fall Start Up Checks

Spring Shutdown Steps

Annual Servicing Recommendation

Troubleshooting and Error Codes

Error Codes Explained

Flashing Indicator Meanings