page 31 of 42
If the glass is broken, do not attempt to light the stove.
Cleaning the surfaces
To clean the surfaces, use a rag dampened with water or with water and a neutral detergent.
Cleaning the metal parts
To clean the metal parts of the stove, use a soft cloth dampened with water. Never clean the metal parts
with alcohol, thinners, petrol, acetone or other degreasing substances. If such substances are used, our
company declines any responsibility.
Eventual variations in the colour of the metal parts can be caused by an incorrect use of the stove.
CLEANING BY THE TECHNICAL
Check every year
Clean the combustion chamber
Remove the brazier and clean it of any residue.
(photo 1)
The use of aggressive detergents or thinners can damage the surfaces of the
stove. Before using any detergent it is advisable to try it on a small section out
of sight or contact the Authorized Assistance Centre for information regarding
the product.
It is necessary to daily clean the brazier and often clean the ash box. The lack of
cleanliness can prevent the starting of the stove, causing damages to the stove
itself and to the environment (possible emission of unbrunt material and soot).
Do not re-use the pellet possibly remained in the brazier due to no starting-up.
(photo 1)
To Next Page
Loading...