EasyManua.ls Logo

KING MIGNON 6 - Maintenance and Cleaning

KING MIGNON 6
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
page 34 of 42
Maintenance and cleaning
Parts
Every
day
Every 2-3
days
Every
week
Every
15
days
Every
30
days
Every
60-90
days
Every
year /
1200-
1400 h
Brazier
Scraper cleaning (if any)
Ash collection compartment
cleaning
Ash tray cleaning (if any)
Door and glass cleaning
Flame-shell cleaning
(if any)
Interior heat exchanger /
smoke fan compartment
cleaning
Complete exchanger cleaning
"T" exhaust cleaning
Flue cleaning
Door gasket cleaning
Internal parts cleaning
Flue pipe cleaning
Electromechanical components
cleaning
All cleaning of all parts must be carried out with the stove com-
pletely cold and unplugged to avoid burns and thermal shock.
The stove does not need much maintenance if used with certi ed
quality pellet. The need for maintenance varies depending on the conditions of use
(switching on and off repeatedly) and depending on the performance required.
Every 1200 hours of work the electronic board sends a warning signal and the di-
splay will show “SERVICE”. This indicates the need for a thorough cleaning of the
stove by a CAT. The lack of such cleaning could result in failure of the stove and
poor combustion, thereby resulting in a lower yield.
◊ by the user
• by the authorised qualified technical assistance