ASSEMBLY
1. Using a set of small pliers, attach a
wheel clip to one side of the wheel
axle.
FIG. 8
2. Tighten the wheel clip until you
hear a snap. The click sound
indicates that the wheel clip is
secured.
FIG. 9
3. From the opposite side of the wheel clip
slide one of the back wheels onto the
wheel axle.
4. Slide the wheel all the way to the end
of the wheel axle and stop at wheel
clip.
FIG. 10
5. Place a wheel cover on the end of
wheel and push down to secure.
FIG. 11
10
To Next Page
Loading...